Admin account has access to GUI ,tmsh and advanced shell by default

Nagle’s algorithm is disabled by default in tcp-lan-optimized profile

Oneconnect profile is associated with following virtual server type

Consider SNAT Automap feature is enabled and floating address of the egress vlan is already exhausted. BIG-IP would prefer the following address next to send the traffic to the pool

Select the valid methods of cookie persistence (Select all that apply)

It is always recommended to verify the software integrity before you install the image because

BIG-IP admin wants to make the forwarding decision based on URL. He must enable following profiles to achieve this (Select all that apply)

The following command can be used to update the SSH access list

When you want to enable persistence only for specific traffic , you can use the following feature

The following output indicates fail safe condition with       
show /sys ha-status
Sys::HA Status       Feature          Action                        Fail
config-not-recvd      sod           go-offline                    no
daemon-heartbeat      scriptd       restart                       no
daemon-heartbeat      snmpd         restart                       no
daemon-heartbeat      sod           restart-all                   no
daemon-heartbeat      tmm           go-offline               yes
pool-mbr-down         pool          failover                      no
crypto-failsafe     cn-crypto-1     failover                      no

Sync-only device group does not require Traffic groups

To configure load balancing method you should navigate to

Global Linux events will be logged to the following file

BIG-IP admin has associated persistence profile with the virtual server. What will happen when the traffic arrived on BIG-IP and it does not match any persistence records

When you want to bundle multiple interfaces on BIG-IP, which of the following needs to be configured

The following statements are true (Select all that apply)

BIG-IP admin wants to enable SSL communication on client-side and server-side connections. He must enable the following profiles (Select all that apply)

Following can be used as Fall back persistence (Select all that apply)

The following priority must be set when you are opening TAC case for adding new functionality

BIG-IP uses the mac address of the following when it sends LACP control frames

You want to exclude user login information from qkview file. You should use the following command

The following load balancing method favours for higher performing server

F5 Technical support requires entire information from your device including sensitive user data. You can use the following command to generate the output

Select true statements about Irules (Select all that apply)

You are able to provision and configure objects for one of the optional modules listed in system>license page but the module feature is inactive since

To reset interface statistics use the following command

BIG-IP admin noticed trunk interface is dropping packets intermittently. It could be due to the following reason

UCS file includes (Select all that apply)

BIG-IP admin wants to see the CPU utilization for data and control plane. Which of the following command can be used to view per plane CPU statistics

There is no matched route but BIG-IP is still able to send return traffic to external clients since the following feature is enabled

You have assigned layer 7 health check to SMTP pool and the monitor is showing down. You can use the following tool to identify the issue with Layer 7

The following user roles do not have access to create new user account (Select all that apply)

Which of the following commands can be used to view the inode usage

Every BIG-IP has the following type of user accounts by default (Select all that apply)

One of the pool members is processing only the persistent and active connections. It is due to the fact that server is in following state

BIG-IP would send RST packet to the back end servers when the following health monitor is being used

BIG-IP may drop the packets for following reasons (Select all that apply)

By default Forwarding decision cannot be made based on URL when SSL passthrough is configured

Refer to the following iRule. BIG-IP admin  should associate the following profile with virtual server to achieve the desired results (Select all that apply)                                                             
when HTTP_REQUEST {      
STATS::incr 
my_stats_profile_name count
}

The following MCP log level ensures that system to log messages for system initiated configurations

To view the management IP address the following command can be used

Password field is not displayed when creating new user account in GUI. This is because

BIG-IP uses the following to determine the order of precedence for the virtual servers (Select all that apply)

The following persistence type supports only HTTP protocol

BIG-IP admin is creating virtual server for syslog traffic. Which of the following virtual server type is recommended for improved performance

Your onsite person reports a LCD warning with an alert level of 2.To clear this LCD warning remotely you need to use following command,

Which of the following virtual server would accept the traffic sent to 192.168.2.1:80

You are trying to add interfaces to the new trunk you created. But some of the interfaces are not shown in the available list since (Select all that apply)

Irule is based on following language

BIG-IP admin has to perform software upgrade on his device. He wants to verify the software integrity before installing the ISO. He can use the following file to verify the integrity (Select all that apply)

You would see config-sync issue when (Select all that apply)

The following virtual server type uses Fast L4 profile by default

Which command produces following output       
 Filesystem      Inodes  IUsed   IFree IUse% Mounted on
/dev/md1       113640   5721  107919     6% / none
 /dev/md2        208100    366  207734    1% /home
/dev/md3        216050  52574  163476   26% /usr
/dev/md4        196608 196608       0  100% /var 

BIG-IP system allocates the following for the provisioned modules (Select all that apply)

F5 licensing server takes following as input

You can see the number of concurrent connections on SNAT IP by (Select all that apply)

By default, virtual server would respond to ICMP/ARP requests even when it is down

You received RMA device and you want to load the UCS file. You can load the UCS file from

BIG-IP admin should perform following tasks to replace the faulty device with RMA (Select all that apply)

Which of the following load balancing method distributes new connections to the member that has fewest L7 requests